Can safety eyewear hurt my vision?

Can safety eyewear hurt my vision? header image

There’s a long-standing myth that wearing safety glasses can harm your vision. Workers are worried whether or not it’s healthy for their eyes to be looking through a “plastic” (aka polycarbonate) lens all day while on the job; it’s a valid concern.

The short answer is no – wearing safety eyewear cannot damage your vision.

However, it can be the source of some discomforts such as headaches and eye fatigue, which can then influence safety and compliance. There are two main issues:

  • Eye strain is the result of pain and fatigue of the eyes, often accompanied by a headache.
  • Eye fatigue happens when the muscles become tired from intense use (from straining to focus) – similar to what happens to other muscles in your body when they’re put through rigorous exercise or overuse.

Signs and causes of eye discomfort with safety glasses

If you’re reading this article, chances are you’ve experienced some discomfort while wearing safety eyewear. Here are some signs of eye strain and eye fatigue:

  • Dry, or watery eyes
  • Soreness of eyes
  • Trouble focusing
  • Blurred vision
  • Light sensitivity
  • Headache “behind the eyes”

It should come as no surprise that eye fatigue and eye strain have everything to do with the quality of your eyewear. If you wear cheap, low-quality safety eyewear for hours at a time on the job, you’ll likely start to experience discomfort.

Even though your eyes won’t be permanently damaged because of eye strain, it will influence productivity. Having to stop what you’re doing and take your eyewear off to refocus your eyes or give them a break from your eyewear is considered lost time.

In extreme situations, eye strain can cause impaired vision, leading to lower visual awareness of your surroundings – affecting your overall ability to detect safety hazards, which can come with very real consequences.

Reasons safety glasses may cause eye fatigue

  • The wrong fit: A common misconception in safety departments is that they can buy one type of eyewear and expect it to work for and fit every employee. This thinking can lead to issues down the road for workers.
  • The wrong tint: If you’re working in environments where you experience glare, do high-precision work, or work indoors and outdoors, different types of tints may be needed. Proper tints help your eyes adjust to the conditions of the environment, lessening the intensity at which your eyes need to focus and refocus. If you’re not using the correct tint on your safety glasses, it could result in eye strain or eye fatigue.
  • Scratched lenses: Scratched lenses can be the result of damage during work, the age of the eyewear, or improper care, cleaning, or storage (raise your hand if you’ve ever tossed your safety glasses on your dashboard!). No matter the reason lenses become scratched, it can affect the quality of vision through the polycarbonate and cause eye strain and fatigue. Make sure that if safety eyewear lenses are scratched, their promptly replaced.
  • Poor optical clarity of lenses: If you’re wearing low-cost eyewear, it’s possible that the quality of the polycarbonate lenses isn’t as good as it could be. If you put on a pair of safety eyewear and the lenses seem cloudy or there seem to be tiny distortions in the lenses, beware. This is a telltale sign of poor optical quality. Lenses with excellent optical quality are free of aberrations and imperfections – they allow to see using as close to natural vision as possible.

How can you help avoid eye fatigue?

  • Know your manufacturer: Understand how they source their frame and polycarbonate materials. How often do they clean and check their lens molds while the lenses are being created, if ever? Do they have any optics experience or an understanding of the science behind how eyes work? All these factors can either positively or negatively affect the quality of the frames and polycarbonate.
  • Trial eyewear before implementing it into your safety program: The best way to ensure you’re wearing safety eyewear that won’t negatively affect your vision, productivity, and safety is to trial it. This allows you to test out several different pairs to find the right comfort, fit, style, performance, and optical clarity for your application.

HexArmor® can help

Our proprietary LTX® Lens Technology with edge-to-edge Optical Class 1 clarity gives wearers as close to natural vision as possible for fewer headaches, eye fatigue, and strain. All lenses are manufactured in-house with 100% visual inspection throughout the production process to ensure that any deviation in optical quality can be immediately corrected.

And that's just one feature of our innovative safety eyewear. Learn more about our safety eyewear technology.

Questions? Let us know if you need help - our Solution Specialists are ready to work with you. Call 1-877-MY ARMOR or send us a message.

Browse all HexArmor® eye protection

Don’t forget to share this post!

You may also like:

Safety eyewear brochure

Safety eyewear brochure

Paper mill experiences fog-free vision in their most challenging environment
Case study

Paper mill experiences fog-free vision in their most challenging environment

What TruShield® anti-fog coating is right for your safety glasses?
Blog post

What TruShield® anti-fog coating is right for your safety glasses?

Reduce workforce injuries to zero

Regardless of your industry, we’ve got the PPE expertise that can help boost compliance, optimize productivity, save money, and most importantly – reduce injuries. See how today.